Wire Mesh Welders
Press & Rocker Welders
Suspended Gun Welders
Electrodes and Consumables
Hollow Metal Door Machines
Wire Harness Welders
Send an Email
SEND AN INQUIRY
Wire Guiding Device
Detects the wires going through or not.
Wire Straightening Device
Straightening the wires.
Feeding wires to the accumulator.
Accumulating the straightened wires.
Straightening again the wires.
Driven by servo motor, advancing progressively based on the programmed required pitch.
Truss Type Forming Device
Forming the wires into Truss type.
2 units for the process of T-type welding.
End-product Pushing device
Pushing progressively based on the required fixed pitch
End-product Shearing device
Auto cutting the preset length accordingly. (Hydraulic system.)
Deposits the end-products after cutting.
Equipped with man-machine interface windows based and PLC control, all the parameters and figures set on the screen, easy operating and maintenance.
Truss-Mesh and Ladder-Mesh are continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls.
Mild steel, Hot dipped Galvanized, Stainless Steel
Press and Rocker Welders
RWC, LLC | PO Box 3153 | Bethlehem, PA 18017
Copyright © 2018 RWC, LLC
WIRE MESH WELDERS
PRESS & ROCKER WELDERS
SUSPENDED GUN WELDERS
ELECTRODES AND CONSUMABLES
WIRE HARNESS WELDERS
CALL US: 484.898.0257