Solutioni - Intuitive Control

RWMA Member
  • Overview

    The SOLUTIONi is a full featured highly accurate resistance welding control that is very easy to use. In fact you can set up and use this control without looking at a direction book!

    It is that intuitive.

     

    Here’s how it works:

    • It asks questions and you answer by pushing the YES
    • or NO button.
    • It asks you to enter numbers and then tells you what to
    • do next.
    • You tell it the type of metal you are welding and the thinnest sheet being joined. It will set up an RWMA welding schedule ready to use.
    • It has a MASTER SETUP button. When pushed it walks you through all user-settings with clear English instructions. This is very useful when first installing a control.
    • It tells you the required air pressure regulator setting for the part you are welding.
    • It tells you the recommended welder transformer tap switch position for each part.*
    • It waits until the proper ELECTRODE FORCE has been reached before starting each weld and eliminates the need for SQUEEZE TIME.*
    • It checks ELECTRODE FORCE again at the end of the weld to be sure that you have not made a brittle weld by having ELECTRODE FORCE that is too high.*
    • It keeps the electrodes closed when any weld fault is detected and tells you how to reset it.
    • It tells you when to dress electrodes.
    • And it does all of the above in clear English,
    • without any codes.
  • Technical Documents

RWC
RWMA Member